Sachtler Ace XL Fluid Head with flowtech 75mm Carbon Fiber Tripod & Carry Handle Kit

Camera Plate

Camera Plate Features Sliding Balance Plate

Balance Plate Sliding Range 4.1" / 10.4 cm

Tripod Platform

Base Mount 75 mm Half Ball

Pan & Tilt

Drag Control 3-Step Plus 0

Vertical Tilt +90° to -75°

Physical

Load Capacity 4.4 to 17.6 lb / 2 to 8 kg

Counter Balance Incremental 8-Step

Bubble Level 1 x Illuminated

Operating Temperature -22 to 140°F / -30 to 60°C

Weight 3.7 lb / 1.7 kg

Packaging Info

Package Weight 6.15 lb

Box Dimensions (LxWxH) 18.1 x 10 x 8"

Sachtler Flowtech 75 GS Carbon Fiber Tripod With Ground Spreader Specs

General

Head Mount Type 75 mm Bowl

Load Capacity 44 lb / 20 kg

Maximum Working Height 62.20" / 1.58 m (with Spreader)

5.02' / 1.53 m (without Spreader)

Minimum Working Height 16.14" / 0.41 m (with Spreader)

10.24" / 0.26 m (without Spreader)

Folded Length 27.17" / 69 cm

Materials Aluminum, Carbon Fiber

Weight 6.39 lb / 2.9 kg

Legs

Leg Lock Type Lever Lock

Independent Leg Spread   Yes

Leg Sections 3

Feet Features Dual Spiked

Spreader Ground (Included)

Center Column

Packaging Info

Package Weight 10.15 lb

Box Dimensions (LxWxH) 28.75 x 7.25 x 7"

Vinten Carry Handle For Flowtech 75/100mm Tripod Specs

Dimensions Not Specified by Manufacturer

Weight 2.8 oz / 80 g

Packaging Info

Package Weight 0.26 lb

Box Dimensions (LxWxH) 5.05 x 3.9 x 1.3"

Sachtler Padded Bag For Flowtech 75 Or TT Tripod With FSB Fluid Head Specs

Exterior Material Nylon

Padded Yes

Packaging Info

Package Weight 4.6 lb

Box Dimensions (LxWxH) 36.5 x 9 x 6.8"

Sachtler Ace XL Fluid Head (75mm Bowl)

The Sachtler Ace XL Fluid Head (75mm Bowl) is designed for digital cine-style cameras, supporting rigs weighing up to 17.6 pounds. This fluid head is suitable for larger DSLR and mirrorless MFT cameras, as well as pro-style cameras such as the Blackmagic URSA Mini/Pro, Canon C200/C300 Mk II, Sony FS series, and the Panasonic EVA1. The Ace XL fluid head features eight steps of counterbalance and three steps of pan and tilt drag adjustment, plus a zero drag option for pan and tilt.

Mount your camera using the Ace XL Fluid Head's slide-in balancing plate with 1/4-20" screw and locating pin. With a sliding range of 4.1" this head can adapt to variously configured rigs. Additional features include a detachable, right-side pan bar and an illuminated bubble level. With an integrated flat head base, the Ace XL can be configured for shooting with a slider.

Compatible Cameras

Including but Not Limited To:

Blackmagic URSA Mini/Mini Pro

Canon C200/C300 Mk II

Sony FS series

Panasonic EVA1

Ace XL Fluid Head Features

Fluid head with 17-pound capacity suited for larger DSLR and mirrorless MFT cameras, and for pro-style digital cine cameras Eight steps of counterbalance; three steps of pan and drag plus zero settings for disengaging the pan and tilt tension 75mm ball-based head has an integrated flat bottom useful for mounting to sliders, etc.

Additional features include a four-inch sliding plate range, 1/4"-20 camera screw, right-side pan bar and illuminated bubble level

Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader

The Sachtler flowtech 75 GS Carbon Fiber Tripod with Ground Spreader eschews the common single or double carbon fiber tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs weigh just under 7 pounds yet they can support a payload of up to 44 pounds and extend from a minimum height of 10" to a maximum height of 62.2" when using the included ground spreader. Each leg features a single clamping lever that locks and unlocks the sections.

Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground without the spreader. An attachment point and carry handle are included.

Features

Dual-stage, carbon fiber, 75mm bowl tripod

The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.

The included ground spreader snaps easily onto the dual-spiked feet using a combination elastic and lever attachment system. The rubber feet are removable from the spreader and can be attached directly to the dual spiked feet of the legs for operation on hard/delicate surfaces without the spreader.

Each leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.

The legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.

Vinten Carry Handle for flowtech 75/100mm Tripod

The Carry Handle for flowtech 75/100mm Tripod from Vinten enables you to carry your lightweight flowtech tripod single-handedly. This handle mounts easily on one of the tripod's accessory docks.

Sachtler Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head

With dimensions of 36.6 x 7.9 x 9.1", this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.

The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.

Padded bag with dimensions of 36.6 x 7.9 x 9.1", designed for carrying a flowtech 75 or TT tripod with an FSB fluid head

900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps

Full-length zipper allows for easy access to the interior compartment

Connecting hand straps, side handles, and D-rings available for transport

Clear plastic window on one of the sides allows you to insert a name tag for easy identification