SONY

Sony's PXW-Z190 4K 3-CMOS 1/3" Sensor XDCAM Camcorder continues the fine tradition of the XDCAM series of cameras. It captures 4K at up to 60p, relying on three 1/3" Exmor R sensors that provide improved low-light capability when compared to standard sensors. The camera integrates a 25x optical Sony G zoom lens and an electronic variable ND filter. The camera supports a variety of codecs out of the box, with an optional MPEG HD license enabling you to shoot HD video. The camera supports HLG (Hybrid Log Gamma), allowing you to shoot and deliver footage compatible with both HDR (high dynamic range) and SDR (standard dynamic range) without needing laborious post-production work. Dual SD card slots permit a variety of recording options including simultaneous HD and 4K recoding. The camera features built-in 2.4 and 5 GHz Wi-Fi. Learn More

Sony LMD-A170 Overview The Sony LMD-A170 17" LCD Production Monitor is a portable, 1920 x 1080 resolution monitor for on set, studio, and broadcast use. The monitor features an IPS LCD display with wide 178° horizontal and vertical viewing angles, and it provides 3G/HD/SD-SDI, HDMI, and composite inputs that support NTSC/PAL, 720p, 1080i, and 1080p input signals with frame rates from 24p to 60p. The monitor introduces several new features and upgrades from previous LMD series monitors, including a new low-latency automatic I/P conversion, a new video processing engine for improved image accuracy, on-screen tally, and yoke mounting screw holes. The monitor also provides a wide range of professional monitoring features. such as built-in waveform and vectorscope, focus assist with adjustable colored peaking, timecode display, and a Slog2 to Rec 709 LUT. A built-in audio decoder lets you display up to 16 channels of embedded SDI audio. Audio can be monitored using the 3.5mm headphone jack on the front panel, or with the 1W built-in speaker. A composite input with loop-through output provides connectivity for standard-definition analog devices and is paired with a 3.5mm stereo mini jack audio input. Two Ethernet ports provide connectivity for serial and parallel remotes; letting you control and load monitor settings via your network, as well as upgrade the monitor's software. For use in the field, there is a 12 VDC power input on 4-pin XLR. The monitor is compatible with standard VESA 100 x 100mm mounting hardware. Optional rackmount brackets are also available. Monitor feet and a handle are included. IPS LCD panel with 178°/178° viewing angles 1920 x 1080 native resolution Multi-format input signal support, NTSC/PAL, 1080i, and 1080p Frame rates from 24p to 60p Dual 3G/HD/SD-SDI inputs with active loop through HDMI input Composite input with loop-through out Slog2 to 709 LUT Multiple color gamut display (SMPTE C, EBU, ITU-R BT.709, and Native) Internal waveform monitor with zoom and line select features Internal vectorscope with zoom Focus assist with adjustable colored peaking EIA/CEA 608 and 708 digital closed caption decoder Timecode display Seven assignable function buttons Ethernet and parallel remote control Embedded audio decoding and display 16-channel audio monitor for SDI input 3.5mm stereo mini jack audio input Front-panel 3.5mm headphone jack Lighted control panel 12 VDC power input Double-coated paint finish Optional rackmount brackets Learn More

The 64GB SxS-1 (G1C) Memory Card from Sony is designed for stable and reliable capture of high frame rate 4K video content. Achieving enhanced read and write speeds, this memory card is suitable for use with Sony's large sensor 4K camera technologies, giving content creators more flexibility and creative options for 4K, 2K, or HD acquisition and production. This SxS-1 memory card features a PCI ExpressCard 34 form factor and can achieve a fast maximum read speed of up to 440 MB/s and write speed of up to 200 MB/s. Additionally, The SxS memory card can use the industry-standard PCIe platform as an interface to realize higher transfer speeds up to 8 Gb/s (1000 MB/s). The Sony SxS card offers wear-leveling (data-defect minimizing function) and data refreshing capabilities and are subjected to a series of strict quality assurance tests, including checks on recording blocks, temperature cycles, and operating environment. In addition to its enhanced frame rate capture capability, this SxS memory cards offer improved reliability and data-error correction. Additionally, you benefit from the data-defect minimizing function for secure data recording and a "power failure management" function for re-creating video clips in case of sudden power loss or accidental card ejection during recording. Its high-reliability is continuously verified through strict inspections and various tests throughout the manufacturing process. In the event of data loss or other incidents, users can retrieve contact information for Sony technical support through a QR (quick response) code embedded onto the cards. 2X the transfer speeds of G1A Series cards Supports EB Streaming between card and Sony camcorders, enabling constant 2-way communication and insuring stable recording while avoiding speed degradation Enhanced media management with Memory Media Utility Learn More

Small and lightweight, Sony's NP-F970 Info-Lithium Battery Pack (6300mAh) provides the advantages of lithium-ion, meaning it can be charged or discharged at anytime without developing memory effect. This means the battery never loses its ability to hold a full charge. The NP-F970 displays remaining battery time on the LCD as well as in the viewfinder by continuously communicating with the camcorder. The battery lasts for up to 12 hours on a single full charge. Sony's Info-Lithium battery packs have a built-in micro processor that accurately calculates remaining battery life in minutes. Learn More

The BP-GL95B Lithium-Ion Battery from Sony powers professional camcorders, monitors, VTRs, and accessories that accept V-mount batteries. This lithium-ion battery has a power capacity of 98Wh, a nominal voltage of 14.4 VDC, 16.8 VDC maximum voltage, and maximum discharge of 10A. Read more below about compatible charger and camera models. Learn More

Key Features

• For InfoLITHIUM NP-FW50 Battery
• Retractable Plug
• 100-240VAC Power for Worldwide Use

Learn More

The Sony HVL-LBPC LED Battery Video Light is a high-brightness bicolor on-camera light designed to provide a wide spread for wide-angle shooting. It provides an even intensity across the entire spread. It offers up to an 1800 lux brightness at 3.3' with low power consumption. You can further increase the brightness to 2100 lux at 3.3' by setting the Booster switch to "on", but this will be at a higher power consumption. Color temperature is adjustable between 3200 and 5600K via a dial on the side. The light features built-in barndoors, a flip-down diffuser, and a condenser lens. It has an L-series battery plate and includes a BP-series battery plate adapter. Batteries are sold separately. An NP-F970 L-series battery provides approximately three hours of runtime. The runtime can be prolonged in Standby mode, which has a power consumption of only 0.1W or less. This light features the proprietary Sony Multi-Interface shoe. When it's mounted directly on Multi-Interface shoe mounts available on cameras such as the Sony NXCAM and XDCAM camcorders, it can be set up to power on/off when the camera is powered on/off or when recording is set to start/stop. Either option can be assigned in the camera settings. A standard shoe mount adapter is also included for attaching the light to standard camera shoe mounts. A mini desktop stand is also supplied for off-camera use. Learn More

• 64GB Storage Capacity
• UHS-II / V90 / U3 / Class 10
• Max Read Speed: 300 MB/s
• Max Write Speed: 299 MB/s
• Min Write Speed: 90 MB/s
• Records 8K, 4K, Full HD, 3D & 60p Video
• Bend / Drop / Water / Dust / X-Ray Proof
• Magnet / Static / UV / Temperature Proof
• No Built-In Write-Protect Switch
• Downloadable File Rescue Software

Learn More

The Sony UWP-D26 is a dependable camera-mount wireless combo microphone system that delivers uncompromising audio quality, while still being easy to use and fast to set up with no menu diving. It is made with simplicity in mind for DIY cameramen, videographers, vloggers, and journalists working in the field without a crew. The system is packed with professional features including NFC Sync and Auto-Gain functions, which handle time-consuming frequency setup and mic-level adjustments for you, so you're ready to shoot within seconds. Rugged and lightweight, the UWP-D26 includes a bodypack transmitter with an ECM-V1BMP omnidirectional lavalier mic. Also included is a plug-on transmitter, which can be attached to a handheld microphone of your choice for man-on-the-street interviews, or to a shotgun mic for wireless booming (both types of mics are available separately). The plug-on provides 48V phantom power, giving you the option to use a condenser microphone. The low-profile camera-mount receiver is designed for enhanced mobility with compact camcorders and smaller DSLR/mirrorless cameras. It offers digital signal processing for pristine audio and analog UHF transmission with true-diversity reception for reliability-even under difficult shooting conditions. Sony shooters can take advantage of the SMAD-P5 digital MI Shoe adapter (available separately), which provides a direct, clean digital audio connection to select cameras equipped with a digital Multi Interface Shoe. With the UWP-D26 you can focus on the other critical elements competing for your attention during a shoot, and confidently record crisp, clear speech or dialog for projects ranging from documentaries to wedding videos, YouTube content, corporate spots, and hands-free interviews. The UWP-D26 is backward-compatible with Sony WL-800 and UWP Series systems. Note: While this system includes two transmitters, only one can be used at a time. Learn More