Genelec
-
Genelec 8010 Bi-Amplified Active Monitor (Single, Producer Finish)
Genelec 8010 Overview
Learn More
Styled in what the manufacturer has dubbed "Producer Finish," the Genelec 8010 Bi-Amplified Active Monitor (Single) is designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25W Class-D amplifiers to power a 3" woofer and a 3/4" metal dome tweeter housed in a die-cast aluminum enclosure.
The monitor utilizes Genelec's Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 Hz to 20 kHz, and provide a maximum SPL of 96 dB.
The amplifiers utilize Genelec's Intelligent Signal Sensing circuitry to conserve electricity, utilizing less than 0.5W in standby mode, 5W when idle, and 30W peak per amplifier at full output. The amplifier automatically detects the presence of an input signal and adjusts the power consumption of the monitor accordingly.
A bass tilt control allows you to adjust the bass response to fit the acoustics of your listening environment. The included ISO stand helps reduce the transmission of structural vibrations into your work surface.Excl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Genelec 8010 AP
Compact Studio Monitor Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Genelec 8040B 6.5" 2-Way 180W Active Studio Monitor (Single, Producer Finish)
Genelec 8040B Overview
Learn More
Styled in a producer finish, the Genelec 8040B is a single 2-way active studio monitor designed to provide accurate mix referencing for audio engineers, musicians, and producers in project studios, small to medium-sized control rooms, broadcast trucks, or mobile setups. It features a 90W amp driving a 6.5” woofer and a 90W amp pushing a 3/4” metal-dome tweeter, producing a frequency response of 45 Hz to 21 kHz.
A proprietary waveguide enhances imaging, while the bass reflex port extends the low-frequency response. The aluminum enclosure is shaped to minimize diffraction. It supports a balanced input via an XLR 3-pin connector. Room compensation options include high- and low-frequency adjustments. There is a selectable power-saving mode that enables automatic power up/down via a signal-sensing circuit.
The 8040B offers multiple mounting options including threaded holes for compatibility with OmniMount and K&M brackets, and an Iso-Pod isolation stand.
6.5" woofer and 3/4" metal-dome tweeter
90W LF amplifier, 90W HF amplifier
45 Hz to 21 kHz frequency response (-3 dB), 48 Hz to 20 kHz frequency response (± 2 dB)
Proprietary waveguide utilizes DCW (Directivity Control Waveguide) technology for improved imaging and a wider listening area
Bass reflex port provides extended low-frequency response
Room compensation controls include high- and low-frequency adjustments
Low-diffraction aluminum enclosure utilizes MDE (Minimum Diffraction Enclosure) technology
Balanced XLR 3-pin input and input level control
ISS (Intelligent Signal Sensing) automatic power-saving mode
Multiple mounting options: Iso-Pod and threaded holes that are compatible with OmniMount and K&M brackets
Includes Iso-Pod isolation stand for vibration decouplingExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Genelec 8020D Studio Monitor (Producer Finish)
Genelec 8020D Overview
Learn More
Styled in what the manufacturer has dubbed a "Producer Finish", and utilizing Class-B amplification, the Genelec 8020D Active Two-Way 4" Studio Monitor provides accurate reproduction of the source material in a compact form factor. Its MDE die-cast aluminum rounded shape minimizes frequency and reflection distortions caused by edge diffraction. The 19mm metal dome tweeter is surrounded by Genelec's Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its ¾" tweeter, and a 50W low-frequency amplifier for its 4" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
Threaded holes for wall or ceiling brackets
Active crossover filter
Driver unit protection circuitry
Woofer and tweeter magnetically shieldedExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Genelec 8050B Active Two-Way 8" Studio Monitor (Single)
Genelec 8050B Overview
Learn More
The 8050B Active Two-Way 8" Studio Monitor from Genelec provides an accurate reproduction of the source material in a compact form-factor with high output. Its die-cast aluminum enclosure features a rounded shape, which minimizes distortions caused by edge diffraction. The metal dome tweeter is surrounded by a smoothly-shaped Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8050B is built with Intelligent Signal Sensing (ISS) technology which automatically activates the speaker when an audio signal is detected, and puts it in Standby Mode when no signal is present, reducing the energy consumption to less than 0.5 watts. The 8050B features a 120 watt high frequency amplifier for its 1" tweeter, and a 150 watt low frequency amplifier for its 8" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
An included Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
The Iso-Pod can be attached to the base or side of the monitor, for vertical or horizontal positioning
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications and multimedia entertainment systems
Rear-facing Tone Controls enable you to optimize the speaker to its environment
Threaded holes for Omnimount Series 60 brackets and K&M loudspeaker mounts
More compatible mounting accessories, such as ceiling mounts and wall brackets, are available separately
Active crossover filters
Driver unit protection circuitry
Fully magnetically shieldedExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Genelec 8030C 5" 2-Way 100W Active Studio Monitor (Single, Producer Finish)
Styled in a dark gray, classic Producer finish, Genelec 8030C is a single 2-way active studio monitor designed to provide accurate mix referencing for audio engineers, musicians, and producers in project studios, small control rooms, or mobile setups. It features 100W of Class-D amplification driving a 5 1/8” woofer and 3/4” metal-dome tweeter, producing a frequency response of 47 Hz to 25 kHz.
Learn More
A proprietary waveguide enhances imaging while the bass reflex port extends the low-frequency response. The aluminum enclosure is shaped to minimize diffraction. It supports a balanced input via an XLR 3-pin connector. Room compensation options include high- and low-frequency adjustments. There is a selectable power-saving mode that enables automatic power up/down via a signal-sensing circuit.
The 8030C offers multiple mounting options including threaded holes for compatibility with mic stands, OmniMount brackets.
The 8030 C comes with an Iso-Pod isolation stand.
5 1/8" woofer and 3/4" metal-dome tweeter
100W Class-D amplification
47 Hz to 25 kHz frequency response (-6 dB), 54 Hz to 20 kHz frequency response (± 2 dB)
Proprietary waveguide utilizes DCW (Directivity Control Waveguide) technology for improved imaging and a wider listening area
Bass reflex port provides extended low-frequency response
Room compensation controls include high- and low-frequency adjustments
Low-diffraction aluminum enclosure utilizes MDE (Minimum Diffraction Enclosure) technology
Balanced XLR 3-pin input and input level control
ISS (Intelligent Signal Sensing) automatic power-saving mode
Multiple mounting options: Iso-Pod and threaded holes that are compatible with mic stands and OmniMount brackets
Includes Iso-Pod isolation stand for vibration decouplingExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price