kupo

The Kupo Steel Baby Boom is a sturdy chrome-plated support that will handle up to 11 lb of gear at its maximum extension of 7.1'. It has a 5/8" end stud and will mount onto any grip head via its built-in "ear". The tail-end hook is handy for sandbags and counterweights. The boom requires a grip head for use, such as the Kupo 2 1/2" Grip Head with Handle (#KUKG203012). Learn More

Kupo KG012112 Overview

The 5-pack of 1/4"-20 D-Ring Screws are made from stainless steel and are ideal as replacement screws for quick release plates. The screw's shaft is 10mm long and can tighten down via the hinged D-ring or using a screwdriver.

Learn More

Kupo KG060511 Overview

Made to attach to tubes with a 1.5 to 2" outer diameter and used like a C-clamp, the Kupo Iron Casting Clamp has a 2.5"-long steel shaft

with 1/2"-13 yoke bolt and washer. It can support up to 220 lb.

Learn More

Kupo KG804412 Overview

Constructed from high-tensile aluminum, the silver-finished Kupo Slim Type Swivel Coupler has two jaws that will accept truss diameters from 1.5 to 2" and support loads up to 330 lb. The jaws swivel 360 degrees so you can mount truss sections at different angles. The swivel has an International TUV safety approval rating

Learn More

Kupo KS403212 Overview

This Heavy-Duty Wind-Up Low Base Steel Stand from Kupo is a crank stand made from a combination of stainless and chrome-plated steel designed for single-user operation. The geared column and crank provide mechanically assisted lift that allows you to confidently lift equipment weighing as much as 176 lb to heights up to 106" using only one hand. The heavy-duty stand can be easily rolled, repositioned, and locked in place with the three included 6" braked casters. Equipment attaches to the 28mm socket built into the center column, and there are three side holes designed to be used with an optional wind bracing kit.

For safety, this stand features a built-in self-locking mechanism that keeps the center column from descending unexpectedly. Weighing 68 lb with a footprint diameter of over 51", this stand's footing is secure while elevating heavy equipment. In preparation for transportation. It collapses to a length of 61.4" and the crank handle folds up to make the stand more portable.

Learn More

Maximum Load: 19.8 lb

Twin Leg Braces

Aluminum Construction

5/8" Top Stud

Learn More

The Kupo Master Combo HD Stand is designed to hold loads up to 88.20 lb at a maximum working height of 133.90" using a 2 riser, 3 section design. The stand features all-steel construction, a triple function universal head and a leveling leg for rough terrain. Learn More

• 0.5" Long 1/4"-20 threaded Stud on Top
• 1/4"-20 Mounting Socket on the Bottom
• Knurled Edge on the Plate
• Adapter for Bracket or Tripod

Learn More

The 2-1/2" Grip Head With Big Handle from Kupo has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roller bearings for maximum torque, and a non-slip aluminum friction disc. This durable grip head is made of aluminum and steel and has a chrome-plated finish. Learn More