kupo
-
Kupo Master Cine Stand (10.6')
Designed to support heavy gear weighing up to 77.2 lb at its maximum height of 6.7', the 24.25 lb steel Master Cine Stand from Kupo has a generous footprint diameter of 54.3" for stability, and an extendable leveling leg for uneven surfaces or terrain. The triple-function universal combo head has mounting options covered. Not only does it have 1-1/8" and 5/8" receivers, but it also has a multidirectional 5/8" stud. The Master Cine Stand folds down to 54.3" for storage and transport. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo Low Mighty Stand (6.7')
- Maximum Load: 77.2 lb
- Maximum Height: 6.7'
- Minimum Height: 3.5'
- Folded Length: 36.2"
- 1-1/8" and 5/8" Receivers, 5/8" Stud
- Weight: 17.2 lb
- Three Sections
- Leveling Leg
- Chrome-Plated Steel Construction
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo High Overhead Roller Stand (19.5')
Kupo High Overhead Roller Overview
Intended to support overhead frames (butterflies), the 19.5' High Roller Stand from Kupo has four sections that are spring-cushioned to eliminate the possibility of equipment damage as the stand is lowered. Fabrication from chrome-plated steel and a 61.4" footprint allow the High Roller to support payloads weighing up to 88.2 lb. Its braked casters allow the stand to be safely moved without wasting time breaking it down and setting up again. The casters have an integrated peg to allow it to stand up when folded down for storage and transport. Another key feature that allows support of overhead frames is the integrated 4-1/2" (lollipop) grip head. A 1-1/8" Junior receiver is also built-in to handle large light fixtures
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo Steel Baby Boom
The Kupo Steel Baby Boom is a sturdy chrome-plated support that will handle up to 11 lb of gear at its maximum extension of 7.1'. It has a 5/8" end stud and will mount onto any grip head via its built-in "ear". The tail-end hook is handy for sandbags and counterweights. The boom requires a grip head for use, such as the Kupo 2 1/2" Grip Head with Handle (#KUKG203012). Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo 1/4"-20 D-Ring Screws (5-Pack)
Kupo KG012112 Overview
The 5-pack of 1/4"-20 D-Ring Screws are made from stainless steel and are ideal as replacement screws for quick release plates. The screw's shaft is 10mm long and can tighten down via the hinged D-ring or using a screwdriver.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo Iron Casting Clamp
Kupo KG060511 Overview
Made to attach to tubes with a 1.5 to 2" outer diameter and used like a C-clamp, the Kupo Iron Casting Clamp has a 2.5"-long steel shaft
with 1/2"-13 yoke bolt and washer. It can support up to 220 lb.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo Slim Type Swivel Coupler (Silver)
Kupo KG804412 Overview
Constructed from high-tensile aluminum, the silver-finished Kupo Slim Type Swivel Coupler has two jaws that will accept truss diameters from 1.5 to 2" and support loads up to 330 lb. The jaws swivel 360 degrees so you can mount truss sections at different angles. The swivel has an International TUV safety approval rating
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Kupo Heavy-Duty Wind-Up Low Base Steel Stand
Kupo KS403212 Overview
This Heavy-Duty Wind-Up Low Base Steel Stand from Kupo is a crank stand made from a combination of stainless and chrome-plated steel designed for single-user operation. The geared column and crank provide mechanically assisted lift that allows you to confidently lift equipment weighing as much as 176 lb to heights up to 106" using only one hand. The heavy-duty stand can be easily rolled, repositioned, and locked in place with the three included 6" braked casters. Equipment attaches to the 28mm socket built into the center column, and there are three side holes designed to be used with an optional wind bracing kit.
For safety, this stand features a built-in self-locking mechanism that keeps the center column from descending unexpectedly. Weighing 68 lb with a footprint diameter of over 51", this stand's footing is secure while elevating heavy equipment. In preparation for transportation. It collapses to a length of 61.4" and the crank handle folds up to make the stand more portable.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Excl. Tax: SAR0.00 Incl. Tax: SAR0.00
Call For Price
-
Kupo Master Combo HD Stand (11')
The Kupo Master Combo HD Stand is designed to hold loads up to 88.20 lb at a maximum working height of 133.90" using a 2 riser, 3 section design. The stand features all-steel construction, a triple function universal head and a leveling leg for rough terrain. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price