tiffen
![](https://www.admc.tv/media/manufacturer/resized/manufacturer/30tiffen.jpg)
-
Tiffen 4 x 4" Water White ND 1.5 Filter (5-Stop)
The Tiffen 4 x 4" Water White ND 1.5 Filter is a solid neutral density filter providing a 5-stop exposure reduction. This 1.5 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By increasing your aperture or slowing your exposure time, you are able to control depth of field and convey movement more easily. Neutral density filters do not affect the coloration of the image and are ideal for pairing with other filters.
This filter is constructed from Water White glass and is made using ColorCore technology, a process that involves laminating the filter substrate between two pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 4 x 4" / 101.6 x 101.6mm.
1.5 solid ND filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required. Providing a 5-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily. Filter does not affect coloration of the image and is ideal for use with other filters.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 4 x 4" Full Spectrum IRND 0.3 Filter (1-Stop)
The Tiffen 4 x 4" Full Spectrum IRND 0.3 Filter is a combination of both an infrared control filter and a 0.3 neutral density filter. An IRND is ideal for HD cameras, which have greater low-light sensitivity and, subsequently, an increased susceptibility to IR contamination. When using a standard neutral density filter to counter the increased light sensitivity afforded by the HD sensor, the effects of infrared pollution become more apparent. This filter combines an ND filter with a comparable IR control filter to eliminate the spill of infrared light reaching the sensor while still maintaining the extra exposure benefits of a neutral density filter.
This filter is constructed from Water White glass and is made using ColorCore technology, a process that involves laminating the filter substrate between two pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 4 x 4" / 101.6 x 101.6mm.
Infrared control filter helps to block infrared pollution from affecting the color fidelity of imagery; this enables a wider color gamut and truer colors, especially noticeable in the darker regions of the image. 0.3 neutral density filter provides a 1-stop exposure reduction. Water White optical glass for excellent clarity.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 82mm Adapter Ring for Pro100 Series Camera Filter Holder
Tiffen PRO10082AR Overview
This Tiffen 82mm Adapter Ring is designed to enable the use of a Tiffen Pro100 Series Camera Filter Holder on a lens with 82mm front filter threads. This adapter ring features a lightweight aluminum alloy construction that has a corrosion-resistant, black anodized finish for durability.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 67mm Variable Neutral Density Filter
The 67mm Variable Neutral Density Filter from Tiffen offers a unique way of maintaining total control over your depth of field as well as presenting an efficient way to create some special effects. The filter is designed with a built-in rotating ring that controls neutral density ranging from 2 - 8 stops (0.6- 2.4). The heavier the density, the slower your shutter speed will be. This longer exposure allows the shutter to remain open long enough to record the same amount of light but will also create movement within the shot. Another major benefit of this filter is the elimination of having to buy and carry around individual neutral density filters. With this one filter, you can rotate to the degree of ND you want - a real time and money saver.
Simply mount the filter on your lens, set it to "Min" density then frame and focus. Care must be taken with focusing at heavier densities to make sure focus is accurate. However, if it isn't, switch to manual focus and rotate to the desired degree of filtration.
For example, if your standard exposure without the filter is 1/500 @ f/8 and you then set the filter to "Min", you change the shutter speed to 1/125 at the same aperture - thereby losing 2 stops of speed while gaining a hint of "blur" in the image. If that's not enough filtration, continue rotating the filter until you reach the shutter speed you desire. Using the above example, you can even get down to 1/2 second @ f/8 (8 stops). It should be noted that the calibration marks on the filter ring are to be used only for reference and should not be regarded as accurate settings for specific densities.
A Neutral Density filter is used to create some unusual special effects such as capturing the "blur" of the rippling water of a waterfall or the swirling effect of city traffic. Since it allows the use of slower shutter speeds in bright light, it becomes possible to create these special effects that would normally not be possible to capture without the filter. And, since it can also help to control your depth of field, it permits you to shoot at wider apertures. Ultimately, its value is in helping to prevent bright, overly washed out images shot in bright light.
The ColorCore process allows Tiffen to control the color and density of their filters, and the characteristics of special effects filters with much greater accuracy than typical dyed-in-the-mass filters, which usually exhibit color and density variations. In this way, Tiffen can better control the various densities of their filters and thereby create more exact degrees of filtration.
Thin Profile Ring (9mm) - The wider front filter ring helps reduce the possibility of vignetting (the darkening of corners) at wide angle and is not deep enough to accommodate a lens cap It allows you to have continuous control over the amount of light coming through your lens in an approximate range of 2 (ND 0.6) to 8 (ND 2.4) stops
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 67mm Adapter Ring for Pro100 Series Camera Filter Holder
Tiffen PRO10067AR Overview
This Tiffen 67mm Adapter Ring is designed to enable the use of a Tiffen Pro100 Series Camera Filter Holder on a lens with 67mm front filter threads. This adapter ring features a lightweight aluminum alloy construction that has a corrosion-resistant, black anodized finish for durability.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 62-52mm Step-Down Ring (Lens to Filter)
Use your favorite filters on a more than one lens with the 62-52mm Step-Down Ring from Tiffen. This ring makes it possible to use a 52mm filter on a lens with a 62mm front thread. Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 77mm Variable Neutral Density Filter
The 77mm Variable Neutral Density Filter from Tiffen offers a unique way of maintaining total control over your depth of field as well as presenting an efficient way to create some special effects. The filter is designed with a built-in rotating ring that controls neutral density ranging from 2 - 8 stops (0.6- 2.4). The heavier the density, the slower your shutter speed will be. This longer exposure allows the shutter to remain open long enough to record the same amount of light but will also create movement within the shot. Another major benefit of this filter is the elimination of having to buy and carry around individual neutral density filters. With this one filter, you can rotate to the degree of ND you want - a real time and money saver.
Simply mount the filter on your lens, set it to "Min" density then frame and focus. Care must be taken with focusing at heavier densities to make sure focus is accurate. However, if it isn't, switch to manual focus and rotate to the desired degree of filtration.
For example, if your standard exposure without the filter is 1/500 @ f/8 and you then set the filter to "Min", you change the shutter speed to 1/125 at the same aperture - thereby losing 2 stops of speed while gaining a hint of "blur" in the image. If that's not enough filtration, continue rotating the filter until you reach the shutter speed you desire. Using the above example, you can even get down to 1/2 second @ f/8 (8 stops). It should be noted that the calibration marks on the filter ring are to be used only for reference and should not be regarded as accurate settings for specific densities.
A Neutral Density filter is used to create some unusual special effects such as capturing the "blur" of the rippling water of a waterfall or the swirling effect of city traffic. Since it allows the use of slower shutter speeds in bright light, it becomes possible to create these special effects that would normally not be possible to capture without the filter. And, since it can also help to control your depth of field, it permits you to shoot at wider apertures. Ultimately, its value is in helping to prevent bright, overly washed out images shot in bright light.
The ColorCore process allows Tiffen to control the color and density of their filters, and the characteristics of special effects filters with much greater accuracy than typical dyed-in-the-mass filters, which usually exhibit color and density variations. In this way, Tiffen can better control the various densities of their filters and thereby create more exact degrees of filtration.
Thin Profile Ring (9mm) - The wider front filter ring helps reduce the possibility of vignetting (the darkening of corners) at wide angle and is not deep enough to accommodate a lens cap It allows you to have continuous control over the amount of light coming through your lens in an approximate range of 2 (ND 0.6) to 8 (ND 2.4) stops
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 82mm Water White Glass ND 1.5 Filter (5-Stop)
The Tiffen 82mm ND 1.5 Filter is a solid ND filter with a 32x filter factor that provides a 5-stop exposure reduction. Its 1.5 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By slowing your exposure time or increasing your aperture, you are able to control depth of field and convey movement more easily. Neutral density filters do not affect the coloration of the image and are ideal for pairing with other filters.
the filter is constructed from Water White glass and is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, and then mounting to precision metal rings.
1.5 neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required. Providing a 5-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily. Filter does not affect coloration of the image and is ideal for use with other filters. Front filter threads allow for use with other filters. Plastic filter case for storage and transport.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 4 x 4" ND 0.9 Filter (3-Stop)
The Tiffen 4 x 4" ND 0.9 Filter is a solid neutral density filter providing a 3-stop exposure reduction. This 0.9 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By increasing your aperture or slowing your exposure time, you are able to control depth of field and convey movement more easily. Neutral density filters do not affect the coloration of the image and are ideal for pairing with other filters.
This filter is made using ColorCore technology, a process that involves laminating the filter substrate between two pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. This filter measures 4 x 4" / 101.6 x 101.6mm.
0.9 solid ND filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required. Providing a 3-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily. Filter does not affect coloration of the image and is ideal for use with other filters.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price
-
Tiffen 4 x 4" Linear Polarizer Filter
The Tiffen 4 x 4" Linear Polarizer Filter helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. The light from the sun naturally becomes partially polarized due to reflecting off electrons in air molecules, causing the light to scatter into what appears as haze. A polarizing filter arranges, and filters, this directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of this light. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage.
A linear polarizer differs from a circular polarizer in that it does not contain an additional quarter wave plane. The addition of a quarter wave plane is to circularly polarize linearly polarized light for the use of auto focus and exposure functions. Due to how the light is broken down and filtered with a linear polarizer, in-camera auto focus and exposure accuracy become skewed during use. When the light becomes circularly polarized, it permits the use of these functions.
This filter is recommended when not using in-camera exposure metering or autofocus. It is non-coated and delivers approximately 40% average light transmission. Tiffen filters are made using ColorCore technology; a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch.
Helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. Polarizing filters arrange, and filter, directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of the light.
Clears up haze in distant landscapes and provides more saturated, vivid colors.
Strongest effect when used at a 90° angle from the sun.
Recommended when not using in-camera exposure metering or autofocus
. Non-coated.
Approximately 40% average light transmission.
2.5x filter factor reduces exposure by 1.3 stops.
Constructed using ColorCore technology.
Filter Pouch for storage and transport.
Learn MoreExcl. Tax: SAR0.00 Incl. Tax: SAR0.00Call For Price