Description
Fully Tuneable from 2,800 K to 10,000 K
• Vibrant Color Selection (RGB+W Color Gamut)
• High Color Rendering
• Large Aperture (1290 x 300 mm)
• Perfect for Vertical Lighting
• Low Power Consumption (400 W Nominal)
• Tremendous Output – Brighter than 2kW Tungsten Soft Light
• Fully Dimmable from 0 to 100 %
• Lightweight and Compact
• Beautiful Soft Beam of Light
• Interchangeable Diffusion Panels
• Wide Range of Accessories Available
• Thin Profile
• On-Board Battery Connection (23 – 36V DC)
• Onboard Simple Control Panel
• Onboard DMX In and Out
• RDM Implementation
• USB-A Connection for Firmware Updates
• EtherCon port for network connectivity
• Fan Mode Selection
• External Lightweight PSU
• powerCON TRUE1 Power Connector
Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output. SkyPanel puts out a tremendous amount of light, in a soft and uniform beam field. Brighter than a 2 kW tungsten soft light or a 6 kW tungsten space light, the SkyPanel S120 has more than enough light for most applications. At the same time, the lamphead is able to perform beautifully at lower light levels. This range of illumination and color gives users an unprecedented amount of control.
Soft lights are known for their smooth quality of light and even, uniform beam field – SkyPanel is no different. The combination of the curated selection of diffusion panels, LED mixing chamber and large light aperture allows for the light to wrap around objects, eliminating sharp shadows and making for a perfect beauty light. The beam field is homogeneous in both color and intensity.
ARRI has always been at the forefront of LED white light color quality and SkyPanel lives up to this standard. Natural rendition of skin tones, accurate color reproduction and precise color temperature settings are all areas where SkyPanel excels. Whether you measure the color rendition using CRI (Color Rendering Index), CQS (Color Quality Scale) or TLCI (Television Lighting Consistency Index), SkyPanel performs beautifully.
Lamphead S120-C
Optical System: Soft Diffusion Panel
Light Aperture: 1290 x 300 mm / 50.8 x 11.8"
Beam Angle: 110° (Half Peak Angle)
Weight: Center Mount: approx. 14 kg / 31 lbs
Manual Version: approx. 16 kg / 36 lbs
Pole Op Version: approx. 20 kg / 44 lbs
Packed Weight (incl. PSU): Center Mount: approx. 24 kg / 53 lbs
Manual Version: approx. 26 kg / 57 lbs
Pole Op Version: approx. 29 kg / 64 lbs
Size (H x W x L): 473 x 133 x 1467 mm / 18.7 x 5.3 x 57.8"
Packed Size (H x W x L): 500 x 300 x 1500 mm / 19.7 x 11.9 x 59.1"
Handling: Aluminum Yoke, High Strength Tilt Lock
Pole Operation Option (Pan & Tilt)
Mounting: 28 mm Spigot (Junior Pin)
Tilt Angle: +/- 90º
Lamphead Voltage Input: 48 V DC
Power Consumption: 400 W Nominal, 430 W Maximum
Lamphead Power Connection: Male 3-Pin XLR to 15 Amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector: Male 4-Pin XLR to 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range: 23 to 36 V DC
Battery Mode Light Output: 50 % of total output
White Light: 2,800 K to 10,000 K continuously variable correlated color temperature
Colored Light: Full RBG+W color gamut with Hue and Saturation control
Color Temperature Tolerance: +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Color Rendition: CRI Average > 95
TLCI Average > 90
Green-Magenta Adjustment: Continuously adjustable (Full Minusgreen to Full Plusgreen)
Dimming: 0 to 100% continuous
Control: On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net
Remote Device Management (RDM*):
*RDM Available in Future Firmware: DMX Setup, Hour Counter and Standard RDM commands
Software Interface: Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac
USB-A: Software Upgrade via flash drive
Housing Color: Blue/Silver, Black
Ambient Temperature Operation: -20 to +45º C (-4 to +113º F)
Protection Class / IP Rating: III / IP20
Estimated LED Lifetime (L70): 50,000 hours
Estimated Color Shift Over Liftetime: +/- 5 %
Certifications: CE, CB, ENEC, cNRTLus, FCC, PSE
Power Supply Unit S60/S120 PSU
Power Supply Input Range: 110 to 240 V ~, 50/60 Hz
Power Supply Output Range: 48 V DC
Power Input Connection: powerCON TRUE1 (Bare Ends / Schuko / Edison cables available)
Power Output Connection: Female 3-Pin XLR to 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
Weight: 3.5 kg / 7.7 lbs
Dimension: 383 x 191 x 91 mm / 15 x 7.5 x 3.6"
Control: On-Board On/Off Switch
Mounting: SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter
Certifications: CE, CB, ENEC, cNRTLus, PSE
Note: All specifications are nominal / typical values.
ARRI SkyPanel S120-C LED Softlight (Blue/Silver, Manual Yoke)
Power Supply Unit for SkyPanel S60 LED Light (Blue/Silver)
Standard Diffusion Panel for SkyPanel S120-C LED Light
PSU Rail Mount Adapter for SkyPanel S30 and S60
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.