| Weight | 2000 kg |
|---|---|
| Manufacturer |
Form Factor Stand/Boom Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Electret Condenser
Polar Pattern Lobar, Supercardioid
Orientation End Address
Circuitry Solid-State
Pad None
High-Pass Filter 300 Hz, 15 dB/Octave
Tone Adjustment None
Gain Adjustment Yes
Indicators 1 x Single LED (Power)
On-Board Controls Gain, High-Pass Filter, On/Off
Windscreen Foam (Included)
Frequency Range 40 Hz to 20 kHz
Maximum SPL 126 dB SPL
118 dB SPL (Max Gain)
Off-Axis Rejection 4 dB at 60°
23 dB at 120°
12 dB at 180°
Sensitivity 8 mV/Pa at 1 kHz
Equivalent Noise Level 21 dB A-Weighted
32 dB CCIR
Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRS
Cable Length 7.87" / 20 cm
Cable Diameter 0.091" / 2.3 mm
Number of Conductors 2
Wireless Connectivity None
Operating Voltage 1.5 V
Battery Type 1 x AAA
Approximate Battery Life 300 Hours
Color Black
Mounting 1/4"-20 Female, Camera-Mount, Shockmount (via Integrated Hardware)
Construction Material Metal
Dimensions ø: 2.44 x L: 5.12" / ø: 62 x L: 130 mm
Weight 2.12 oz / 60 g
Package Weight 0.555 lb
Box Dimensions (LxWxH) 9.35 x 6.75 x 1.95"
Most built-in camera microphones are omnidirectional to pick up sound from all directions, which results in undue noise and ambience. The MKE 400 uses a supercardioid/lobar polar pattern to capture sources in front of the mic while attenuating side- and rear-entry sound. Low-noise electronics and a sensitive condenser element allow it to deliver more detailed audio than the mics typically found in cameras and portable recorders.
The MKE 400 has a permanently attached coiled cable to ensure fast hookup to your camera without excess cable slack. The cable's 3.5mm TRS plug features a dual-mono configuration, which routes identical signal to both input channels on your camera or portable recorder.
A single AAA battery powers the MKE 400 for up to 300 hours of operating time. The dedicated battery LED flashes briefly upon power up to indicate sufficient battery voltage, and lights up continually when the battery should be replaced. Approximately 50 hours of run time remain once the low-battery indicator lights up. To conserve battery life during periods of inactivity, use the power switch to turn off the mic or remove the battery from the battery compartment.
When excessive low-frequency noise from HVAC systems and traffic interferes with the clarity of your audio, activate the low-cut filter to attenuate bass frequencies while letting midrange and high-frequencies pass through unaffected.
Achieving proper recording levels is crucial to avoiding distortion. The MKE 400's adjustable sensitivity provides two settings to optimize the mic's audio signal volume. Normal sensitivity is recommended when miking normal to loud sources and recording to devices with high input sensitivity. Select high sensitivity when miking quiet sources or using cameras with low input sensitivity.
The MKE 400 incorporates an integral shockmount to reject the transfer of vibrations such as handling noise. Plus, the bottom of the shockmount features a camera shoe mount with a 1/4"-20 thread, ensuring simple attachment to your camera or a tripod (available separately).
The foam windscreen on the MKE 400 is designed to lessen undesirable wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, acquire a furry windshield such as the Sennheiser MZW 400 (available separately), which also comes with an adapter that lets you plug the MKE 400 into the XLR input of a professional camcorder.
The MKE 400's all-metal construction provides a durable, rugged frame for rigorous operation in a variety of environments.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.